 |  |  |  |  |  |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Brakes |
Combo Rotor/Sprocket Rear Disc Brake:
- American Suspension Caliper-Rotor Set includes polished
stainless unified 50T rotor/sprocket combo to fit 3/4" or 1" axle
- Run a completely clean right or left rear wheel side!!!
- Choose for Right Side or Left Side Primary Drive
$525/Kit & up
- American Suspension Caliper-Rotor Set includes polished
stainless unified 50T rotor/sprocket combo to fit 3/4" or 1" axle
- Run a completely clean right or left rear wheel side!!!
- Choose for Right Side or Left Side Primary Drive
$525/Kit & up
Edart Caliper-Rotor Rear Brake Set:
- 2 Piston Chrome Caliper and polished 50T Sprotor
- For 1" or 3/4" axle
$500
- 2 Piston Chrome Caliper and polished 50T Sprotor
- For 1" or 3/4" axle
$500
Rigid XL Chrome Caliper Kit:
- Includes 11.5" polished rotor, bolts, chrome 4-piston caliper
complete with integral bracket and weld-on frame tab for left side
$324/Kit
- Includes 11.5" polished rotor, bolts, chrome 4-piston caliper
complete with integral bracket and weld-on frame tab for left side
$324/Kit
GMA Rear Disc Brake Caliper Kit for '73-82 FX-FL:
- Includes 10" or 11-1/2" Rotor, Dual-Piston Caliper, Bracket,
Bolts & Nuts, and Mounting Hardware
- Use 5/8" Bore Master Cylinder
$270 - Up
- Includes 10" or 11-1/2" Rotor, Dual-Piston Caliper, Bracket,
Bolts & Nuts, and Mounting Hardware
- Use 5/8" Bore Master Cylinder
$270 - Up
Russell Pro System 1 & 2 Bike Builders Kit:
- Asst. of necessary components needed to build brake lines
- Includes 25 ft. of clear-coated s.s. line (Sys.1) or black hose
(Sys.2), chrome banjos/bolts, and adapter fittings
$731 or $550
- Asst. of necessary components needed to build brake lines
- Includes 25 ft. of clear-coated s.s. line (Sys.1) or black hose
(Sys.2), chrome banjos/bolts, and adapter fittings
$731 or $550
GMA Floating Springer Front Brake:
- Adaptable (via spacer changes) to most aftermarket and
custom springer builds
- Also works directly on Paughco Wide Springers
- Includes caliper, bracket, rod, hardware, and spacers/bushing
$338/Kit
- Adaptable (via spacer changes) to most aftermarket and
custom springer builds
- Also works directly on Paughco Wide Springers
- Includes caliper, bracket, rod, hardware, and spacers/bushing
$338/Kit
GMA 6 Piston Caliper Kits with 12-5/8" Rotors:
- GMA utilizes progressively sized pistons to reduce heat at the
leading edge of the pads which also controls uneven wear from
front to back
- All kits include rotor
- Chrome plated
- Fits front single disc, all models 1984-1999
- Fits frond dual disc, all models 1984-1999
- Fits rear softail 1987-1999
$898.00-up / Kit
- GMA utilizes progressively sized pistons to reduce heat at the
leading edge of the pads which also controls uneven wear from
front to back
- All kits include rotor
- Chrome plated
- Fits front single disc, all models 1984-1999
- Fits frond dual disc, all models 1984-1999
- Fits rear softail 1987-1999
$898.00-up / Kit
| In Stock NOW and ready to ship!!!! |
| Quick Search: |
Don't Throw Away That Old Brake Caliper You Scored At The
Swapmeet! Just Fix The Bleeder Screw!
- Fits most stock type calipers
$5.00
Swapmeet! Just Fix The Bleeder Screw!
- Fits most stock type calipers
$5.00
HHI Sprocket & Brake Combination:
- Rigid & Softail type tail section
- Adapters to use with a 3/4" or 1" O.D. axle
- Slotted brake stop requires welding for installation
- 4 piston caliper to use with 11/16" bore master cylinder &
10mm brake line banjo
- Extra thick brake pads over 7 square inches
- Left & Right side available
$698 - $745
- Rigid & Softail type tail section
- Adapters to use with a 3/4" or 1" O.D. axle
- Slotted brake stop requires welding for installation
- 4 piston caliper to use with 11/16" bore master cylinder &
10mm brake line banjo
- Extra thick brake pads over 7 square inches
- Left & Right side available
$698 - $745
