 |  |  |  |  |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Driveline & Offsets |
BDL Offset Front Pulley Inserts & Nuts:
- From 1/2" up to 2" offset in 1/4"
increments
$83/Set
- From 1/2" up to 2" offset in 1/4"
increments
$83/Set
| Quick Search: |
- Includes trans plate, motor primary spacer, sprocket spacer and
compensator
- Will allow use of 160 series tire on chain drive models only.
$243.00
compensator
- Will allow use of 160 series tire on chain drive models only.
$243.00
Offset Motor Flange Spacer:
- Machined from Billet Aluminum
- Available from 1/4" to 2" Offset
From $66 to $144
- Machined from Billet Aluminum
- Available from 1/4" to 2" Offset
From $66 to $144
Polished Pulley Spacers for 1980-'99 Hubs (2" Locator):
- Threaded to adapt pulley to hub
- Select Thickness option
- Extra support - uses 2 sets of bolts to
mount $30.00/each
- Threaded to adapt pulley to hub
- Select Thickness option
- Extra support - uses 2 sets of bolts to
mount $30.00/each
Pulley Adaptor Ring:
Will adapt 2000-up 1.125" wide types to 1999 and earlier wheel
hubs, which allow use of a 170 mm wide tire on 1999 and earlier
applications.
$25.50/each
Will adapt 2000-up 1.125" wide types to 1999 and earlier wheel
hubs, which allow use of a 170 mm wide tire on 1999 and earlier
applications.
$25.50/each
Fit 2000-up front or rear hubs.
.500" $40.00 1.100" $45.00
.750" $40.00 1.250" $45.00
.937" $40.00 1.375" $50.00
.500" $40.00 1.100" $45.00
.750" $40.00 1.250" $45.00
.937" $40.00 1.375" $50.00
Pulley Spacers:
- 7/16" Bolt Holes, 2-1/16" i.d. w/4-5/16" o.d. for 1980-'99
- Thicknesses from 1/16" up to 1-1/4"
From $10 to $56
- 7/16" Bolt Holes, 2-1/16" i.d. w/4-5/16" o.d. for 1980-'99
- Thicknesses from 1/16" up to 1-1/4"
From $10 to $56
Pulley Adapter Flange:
Use this bad boy on any combination of early or late wheel pulley or
sprocket combination!
$58.00
Use this bad boy on any combination of early or late wheel pulley or
sprocket combination!
$58.00
| 3/8" thick-3 piece |
| 1/4" thick-2 piece |